1-2
e Figure 1-2 System parameter configuration pag
Table 1-1 describes the system parameter configuration items.
Table 1-1 System parameter configuration items
Item Description
Sysname
Specify the system name.
The system name appears at the top of the navigation tree.
You can also set the system name in the System Name page you enter by
selecting Device > Basic. For details, refer to Device Basic Information
Configuration.
Syslocation
Specify the physical location of the system.
You can also set the physical location in the setup page you enter by selecting
Device > SNMP. For details, refer to SNMP Configuration.
Syscontact
Set the contact information for users to get in touch with the device vendor for
help.
You can also set the contact information in the setup page you enter by
selecting Device > SNMP. For details, refer to SNMP Configuration.
To Next Page
Loading...
