1-4
Figure 1-2 Domain Setup page
Table 1-2 describes the configuration items for creating an ISP domain.
Table 1-2 ISP domain configuration items
Item Description
Domain Name
Type the ISP domain name, which is for identifying the domain.
You can type a new domain name to create a domain, or specify an existing
domain to change its status (whether it is the default domain).
Default Domain
Specify whether to use the ISP domain as the default domain.
z Enable: Uses the domain as the default domain.
z Disable: Uses the domain as a non-default domain.
There can only be one default domain at a time. If you specify a second
domain as the default domain, the original default domain will become a
non-default domain.
Return to
Configuration Task List.
Configuring Authentication Methods for the ISP Domain
Select Authentication > AAA from the navigation tree and then select the Authentication tab to enter
the authentication method configuration page, as shown in
Figure 1-3.
To Next Page
Loading...
