1-6
Configuring Authorization Methods for the ISP Domain
Select Authentication > AAA from the navigation tree and then select the Authorization tab to enter
the authorization method configuration page, as shown in
Figure 1-4.
Figure 1-4 Authorization method configuration page
Table 1-4 describes the configuration items for configuring the authorization methods for an ISP
domain.
Table 1-4 Authorization method configuration items
Item Description
Select an ISP
domain
Select the ISP domain for which you want to specify authentication methods.
Default AuthZ
Name
Secondary
Method
Configure the default authorization method and secondary authorization method
for all types of users.
Options include:
z Local: Performs local authorization.
z None: All users are trusted and authorized. A user gets the corresponding
default rights of the system.
z RADIUS: Performs RADIUS authorization. You need to specify the RADIUS
scheme to be used.
z Not Set: Restore the default, that is, local authorization.
LAN-access
AuthZ
Name
Secondary
Method
Configure the authorization method and secondary authorization method for
LAN access users.
Options include:
z Local: Performs local authorization.
z None: All users are trusted and authorized. A user gets the corresponding
default rights of the system.
z RADIUS: Performs RADIUS authorization. You need to specify the RADIUS
scheme to be used.
z Not Set: Uses the default authorization methods.
To Next Page
Loading...
