1-2
Figure 1-2 Local user configuration page
Table 1-1 describes the configuration items for configuring a local user.
Table 1-1 Local user configuration items
Item Description
Username Specify a name for the local user.
Password
Confirm
Specify and confirm the password of the local user. The settings of these two
fields must be the same.
Group
Select a user group for the local user.
For information about user group configuration, refer for
Configuring a User
Group
.
Service-type
Select the service types for the local user to use, including FTP, Telnet, LAN
access (accessing through the Ethernet, such as 802.1x users), and SSH.
If you do not specify any service type for a local user who uses local
authentication, the user cannot pass authentication and therefore cannot log
in.
Expire-time
Specify an expiration time for the local user, in the format
HH:MM:SS-YYYY/MM/DD.
When authenticating a local user with the expiration time argument configured,
the access device checks whether the expiration time has elapsed. If not, the
device permits the user to log in.
To Next Page
Loading...
