1-2
Figure 1-1 Set system logs related parameters
Table 1-2 describes the syslog configuration items.
Table 1-2 Syslog configuration items
Item Description
Log Buffer Size
Set the number of logs that can be stored in the log buffer.
Refresh Period
Set the refresh period on the log information displayed on the Web interface.
You can select manual refresh or automatic refresh:
z Manual: You need to click Refresh to refresh the Web interface when
displaying log information.
z Automatic: You can select to refresh the Web interface every 1 minute, 5
minutes, or 10 minutes.
Return to
Log management configuration task list.
Displaying Syslog
Select Device > Syslog from the navigation tree to enter the syslog display page, as shown in Figure
1-2.
To Next Page
Loading...
