ABB ACH580-01 - Reinstalling Covers, Frame R5; IP21 (UL Type 1); IP55 (UL Type 12)

￭ Reinstalling covers, frame R5
IP21 (UL Type 1)
1. Reinstall the box cover: Slide the cover upwards (1a) and tighten the retaining
screws (1b) with a T20 Torx screwdriver.
2. Reinstall the module cover: Press the cover at the bottom (2a) and tighten the
retaining screws (2b).
IP55 (UL Type 12)
1. Reinstall the front cover: Press the cover at the bottom (1a) and tighten the retaining
screws (1b) with a T20 Torx screwdriver.
IP21 (UL Type 1)IP21 (UL Type 1)
2
2a
2b
1
1a
1b
1b
IP55 (UL Type 12)
1
1a
1b
x 8
158 Electrical installation – IEC