ABB ACH580-01 - Input Power Cabling

BRAKE RESINPUT
PE
MOTOR
R-
R+
UDC+
L1 L2 L3 T1/U T2/V T3/W
7a
7b
MOTOR
T1
U
T2
V
T3
W
INPUT
L1 L2 L3
BRAKE RES
R-R+
UDC+
7a
7b
R4
7a
7b
R4R3R2R1Frame size
lbf·ftN·mlbf·ftN·mlbf·ftN·mlbf·ftN·m
3.04.02.63.51.11.50.71.0T1/U, T2/V, T3/W
2.12.91.11.51.11.51.11.5
PE,
Input power cabling
8. Strip the ends of the conductors as for the motor cabling.
9. Slide the conductors through the conduit.
10. Connect the conductors:
• Connect the grounding conductor to the grounding terminal. (10a)
• Connect the phase conductors to the L1, L2 and L3 terminals. Tighten the
screws to the torque given in the table. (10b).
R3R1…R2
176 Electrical installation – North America