ABB ACH580-01 - Common Mode, Du;Dt and Sine Filters; Content of this Chapter; Common Mode Filters; When Is a Common Mode Filter Needed

15
Common mode, du/dt and sine
filters
Content of this chapter
This chapter describes how to select external filters for the drive.
Common mode filters
￭ When is a common mode filter needed?
See section Examining the compatibility of the motor and drive (page 88).
Common mode filter kits are available from ABB, see the table on page Common mode
filter types (page 391). A kit includes three wound cores. For installation instructions of
the cores, see the instruction included in the core package.
￭ Common mode filter types
IEC ratings at U
n
= 400 V and 480 V, UL (NEC) ratings at U
n
= 480 V
For common mode filters for smaller types, contact your local representative.
North Americ-
an type
ACH580-01-
Frame sizeCommon mode filters
ABB drives
IEC type
ACH580-01-
052A-4R464315811062A-4
065A-4R464315811073A-4
078A-4R564315811088A-4
096A-4R564315811106A-4
Common mode, du/dt and sine filters 391