1
2
3
Note: P
n
is not shown in UL (NEC) drive labels
Type designation key
The type designation contains information on the specifications and configuration of the
drive. You find the type designation on the type designation label attached to the drive.
The first digits from the left express the basic configuration, for example,
ACH580-01-12A7-4. The optional selections are given after that, separated by plus
signs, for example, +L501. The main selections are described below. Not all selections
are available for all types.
DescriptionCode
Basic codes
Product seriesACH580-01
When no options are selected: Wall mounted, IP21 (UL Type 1), ACH-AP-H Hand-
Off-Auto control panel, choke, EMC C2 filter (internal EMC filter), safe torque off,
braking chopper in frames R1, R2, R3, coated boards, cable entry from the bottom,
cable box or the conduit plate with cable entries, quick installation and start-up
guide (multilingual kit).
01
Size
See the rating tablesxxxx
Voltage rating
50 Operation principle and hardware description
To Next Page
Loading...
