Note: There are special considerations in corner-grounded installations above 2000 m.
Contact your local ABB representative for further information.
Markings
These markings are attached to the drive:
CE mark
Product complies with the applicable European Union legislation. For fulfilling the EMC
requirements, see the additional information concerning the drive EMC compliance
(IEC/EN 61800-3).
TÜV Safety Approved mark (functional safety)
Product contains Safe Torque Off and possibly other (optional) safety functions which
are certified by TÜV according to the relevant functional safety standards. Applicable
to drives and inverters; not applicable to supply, brake or DC/DC converter units or
modules.
UL Listed mark for USA and Canada
Product has been tested and evaluated against the relevant North American standards
by the Underwriters Laboratories. Valid with rated voltages up to 600 V.
CSA certification mark for USA and Canada
Product has been tested and evaluated against the relevant North American standards
by the CSA Group. Valid with rated voltages up to 600 V.
EAC (Eurasian Conformity) mark
Product complies with the technical regulations of the Eurasian Customs Union. EAC
mark is required in Russia, Belarus and Kazakhstan.
Electronic Information Products (EIP) symbol including an Environment Friendly Use
Period (EFUP)
Product is compliant with the People’s Republic of China Electronic Industry Standard
(SJ/T 11364-2014) about hazardous substances. The EFUP is 20 years.
UKCA (UK Conformity Assessed) mark
Product complies with the applicable United Kingdom’s legislation (Statutory Instru-
ments). Marking is required for products being placed on the market in Great Britain
(England, Wales and Scotland).
KC mark
Product complies with Korea’s product safety requirements for electrical and electronic
equipment and components that utilize power from 50…1000 V AC.
302 Technical data
To Next Page
Loading...
