ABB ACH580-01 - Control Panel Display Elements

￭ Control panel door mounting kits
You can use a mounting platform to mount the control panel on the cabinet door.
Mounting platforms for control panels are available as options from ABB. For more
information, see
Code (English)Manual
3AUA0000100140
DPMP-01 mounting platform for control panels installation guide
3AUA0000136205
DPMP-02/03 mounting platform for control panels installation guide
3AXD50000308484
DPMP-04 and DPMP-05 mounting platform for control panels installation
guide
3AXD50000289561
DPMP-06 / 07 mounting platform for control panels installation guide
Type designation label
The type designation label includes IEC and UL (NEC) ratings, appropriate markings
and the type designation and serial number, which allow identification of each drive.
The type designation label is located on the left side of the drive, see section Locations
of the labels on the drive (page 49). An example label is shown below.
1
3
4
5
6
7
8
9
10
11
2
DescriptionNo.
Type designation, see section Type designation key (page 50).
1
Name and address of the manufacturer2
Frame (size) (New design of frame R4 types are marked as R4 v2)3
Type of the drive, for example, with Air cooling or Liquid cooling, and so on.4
IEC: Icc (Rated conditional short-circuit current) = 65 kA,5
UL (NEC): SCCR (Short circuit current rating) = 100 kA
Degree of protection6
Typical drive losses when it operates at 90% of the motor nominal frequency and 100% of
the drive nominal output current
7
48 Operation principle and hardware description