ABB ACH580-01 - Mechanical Installation; Necessary Tools; Unpacking and Examining the Delivery; Installing the Module

62
63
CMOD-02
CCU
34
35
X4
36
37
38
OUT1
OUT2
SGND
IN1
IN2
RO PTC C
RO
PTC B
40
41
+
-
24V AC/DC + in
24V AC/DC - in
24 V AC/DC
Common, CRO PTC C62External 24 V (AC/DC) input24 V AC/DC
+ in
40
Normally open, NORO PTC B63External 24 V (AC/DC) input24 V AC/DC
- in
41
Grounding screw1Motor thermistor connection5
60
61
PTC IN
PTC IN
One to six PTC thermistors connected in series.
Hole for mounting screw2PTC connectionPTC IN60
Diagnostic LED6Ground (earth) potentialPTC IN61
￭ Mechanical installation
Necessary tools
• Screwdriver and a set of suitable bits.
Unpacking and examining the delivery
1. Open the option package. Make sure that the package contains:
• the option module
• a mounting screw.
2. Make sure that there are no signs of damage.
Installing the module
See section Installing option modules (page 153).
￭ Electrical installation
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or death,
or damage to the equipment can occur.
386 Optional I/O extension and adapter modules