ABB ACH580-01 - Ul (Nec)

Nominal output current. Maximum continuous rms output current allowed (no
overload).
I
2
Nominal power of the drive. Typical motor power (no overload). The kilowatt ratings
apply to most IEC 4-pole motors. The horsepower ratings apply to most NEMA 4-
pole motors.
P
n
Maximum current with 10% overload, allowed for one minute every ten minutes.I
Ld
Typical motor power in light-duty use (10% overload). The horsepower (hp)P
Ld
ratings apply to most NEMA 4-pole motors.
Maximum current with 50% overload, allowed for one minute every ten minutes.I
Hd
1)
Maximum current with 30% overload, allowed for one minute every ten minutes.
2)
Maximum current with 25% overload, allowed for one minute every ten minutes.
Typical motor power in heavy-duty use (50% overload).P
Hd
￭ UL (NEC)
Frame
size
Output ratingsInput
rating
ACS580-
01-
Heavy-duty useLight-duty useMax.
current
P
Hd
I
Hd
P
Ld
I
Ld
I
max
I
1
hpAhpAAA
3-phase U
1
= 208…240 V, P
n
at U
n
= 208/230 V, 60 Hz
R10.83.51.04.66.34.604A6-2
R11.04.61.56.68.96.606A6-2
R11.56.62.07.511.97.507A5-2
R12.07.53.010.614.310.610A6-2
R13.010.65.016.722.616.7017A-2
R25.016.77.524.232.724024A-2
R27.524.21030.843.631031A-2
R31030.81546.262.446046A-2
R31546.22059.483.259059A-2
R52574.8308813588088A-2
R53088.040114158114114A-2
R64011450143205143143A-2
R75014360169257169169A-2
R76016975211304211211A-2
R875211100273380273273A-2
R9100273125343492343343A-2
R9125343150396560396396A-2
Technical data 235