ABB ACH580-01 - IP21 (UL Type 1), IP55 (UL Type 12)

IP21 (UL Type 1), IP55 (UL Type 12)
9. Position the drive onto the lower bolts (9a) on the wall to support the weight of the
drive. Rotate drive to the wall and place drive over the upper bolts (9b). Lift the drive
with another person or with a lifting device as it is heavy. Tighten the bolts in the
wall securely (9c).
10. Tighten the two remaining bolts securely.
10
9
9b
9c
9c
×2
×2
9a
Note: Install the hood to UL Type 12 drives after you have installed the drive electrically
and reinstalled covers, see Installing UL Type 12 hood (page 207).
Mechanical installation 81