ABB ACH580-01 - Page 78

6. Remove the screw (6a) and lift the cover off (6b) from the separate cable box.
7. Attach the cable box cover to the front cover.
8. Install the cable box to the frame. Position the cable box (8a) and tighten the screws
(8b).
6a
6b
8b
8b
6 7 8
8a
Note: Install the hood to UL Type 12 drives after you have installed the drive electrically
and reinstalled covers, see Installing UL Type 12 hood (page 207).
78 Mechanical installation
4