ABB ACS880 - Page 240

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
1Local control disabled.Yes
Rpm / uint16Selects the reference type for scalar motor control mode.
See also section Operating modes of the drive (page 26),
and parameter 99.4 Motor control mode.
Note: This parameter cannot be changed while the drive
is running.
Scalar control
reference unit
19.20
0
Hz. The reference is taken from parameter 28.2 Frequency
ref ramp output (output of the frequency control chain).
Hz
1
Rpm. The reference is taken from parameter 23.2 Speed
ref ramp output (speed reference after ramping and
shaping).
Rpm
240 Parameters