ABB ACS880 - Fault Functions

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
Configuration of external events; selection of behavior of
the drive upon fault situations.
Fault functions31
Inactive (true); DI6
(95.20 b8) / uint32
Defines the source of external event 1.
See also parameter 31.2 External event 1 type.
0 = Trigger event
External event 1
source
31.1
1 = Normal operation
00.Active (false)
11.Inactive (true)
2
DIIL input (10.2 DI delayed status, bit 15).
DIIL
3
Digital input DI1 (10.2 DI delayed status, bit 0).
DI1
4
Digital input DI2 (10.2 DI delayed status, bit 1).
DI2
5
Digital input DI3 (10.2 DI delayed status, bit 2).
DI3
6
Digital input DI4 (10.2 DI delayed status, bit 3).
DI4
7
Digital input DI5 (10.2 DI delayed status, bit 4).
DI5
8
Digital input DI6 (10.2 DI delayed status, bit 5).
DI6
11
Digital input/output DIO1 (11.2 DIO delayed status, bit 0).
DIO1
12
Digital input/output DIO2 (11.2 DIO delayed status, bit 1).
DIO2
See Terms and abbreviations (page 132).
Other
Fault (95.20 b8) /
uint16
Selects the type of external event 1.External event 1 type31.2
0The external event generates a fault.Fault
1The external event generates a warning.Warning
3If the drive is modulating, the external event generates a
fault.
Warning/Fault
Otherwise, the event generates a warning.
Inactive (true); DIIL
(95.20 b5) / uint32
Defines the source of external event 2. See also parameter
31.4 External event 2 type.
For the selections, see parameter 31.1 External event 1
source.
External event 2
source
31.3
Fault / uint16Selects the type of external event 2.External event 2 type31.4
0The external event generates a fault.Fault
1The external event generates a warning.Warning
3If the drive is modulating, the external event generates a
fault.
Warning/Fault
Otherwise, the event generates a warning.
Inactive (true) / uint32Defines the source of external event 3. See also parameter
31.6 External event 3 type.
External event 3
source
31.5
For the selections, see parameter 31.1 External event 1
source.
- / uint16Selects the type of external event 3.External event 3 type31.6
0The external event generates a fault.Fault
1The external event generates a warning.Warning
330 Parameters