ABB ACS880 - Input References

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
Values of references received from various sources.Input references3
All parameters in this group are read-only unless otherwise
noted.
0.00 / real32Local reference given from the control panel or PC tool.Panel reference3.1
1 = 10 / 100 = 1Local control panel or PC tool reference.-100000.00 ...
100000.00
- / real32Remote reference given from the control panel or PC tool.Panel reference 23.2
1 = 10 / 100 = 1Remote control panel or PC tool reference.-30000.00 ...
30000.00
0.00 / real32Reference 1 received through fieldbus adapter A.
See also chapter Fieldbus control through a fieldbus
adapter (page 609).
FB A reference 13.5
1 = 10 / 100 = 1Reference 1 from fieldbus adapter A.-100000.00 ...
100000.00
0.00 / real32Reference 2 received through fieldbus adapter A.FB A reference 23.6
1 = 10 / 100 = 1Reference 2 from fieldbus adapter A.-100000.00 ...
100000.00
0.00 / real32Reference 1 received through fieldbus adapter B.FB B reference 13.7
1 = 10 / 100 = 1Reference 1 from fieldbus adapter B.-100000.00 ...
100000.00
0.00 / real32Reference 2 received through fieldbus adapter B.FB B reference 23.8
1 = 10 / 100 = 1Reference 2 from fieldbus adapter B.-100000.00 ...
100000.00
- / real32Scaled reference 1 received through the embedded fieldbus
interface. The scaling is defined by 58.26 EFB ref1 type.
EFB reference 13.9
1 = 10 / 100 = 1Reference 1 received through the embedded fieldbus
interface.
-30000.00 ...
30000.00
- / real32Scaled reference 2 received through the embedded fieldbus
interface. The scaling is defined by 58.27 EFB ref2 type.
EFB reference 23.10
1 = 10 / 100 = 1Reference 2 received through the embedded fieldbus
interface.
-30000.00 ...
30000.00
- / real32Reference 1 received from the external (DDCS) controller.
The value has been scaled according to parameter 60.60
DDCS controller ref1 type.
DDCS controller ref 13.11
See also section External controller interface (page 42).
1 = 10 / 100 = 1Scaled reference 1 received from external controller.-30000.00 ...
30000.00
- / real32Reference 2 received from the external (DDCS) controller.
The value has been scaled according to parameter 60.61
DDCS controller ref2 type.
DDCS controller ref 23.12
1 = 10 / 100 = 1Scaled reference 2 received from external controller.-30000.00 ...
30000.00
142 Parameters