ABB ACS880 - Settings and Diagnostics

• actual signals
•
parameter group 47
•
parameters that are activated to validate new settings (such as 51.27 and 96.7)
•
parameters that are not saved to the flash memory (such as 96.24…96.26)
•
parameters that are internally calculated from others (such as 98.9…98.14).
• dynamic parameters (eg. parameters that vary according to hardware), and
• application program parameters.
The default set can be edited using the Drive customizer PC tool.
Settings and diagnostics
Parameters: 96.53 Actual checksum (page 514)…96.59 Approved checksum 4 (page 515).
Events: 6200 Checksum mismatch (page 550) and A686 Checksum mismatch (page 564).
Program features 103