ABB ACS880 - QR Code Generation for Mobile Service Application

QR Code generation for mobile service application
A QR Code (or a series of QR Codes) can be generated by the drive for display on the
control panel. The QR Code contains drive identification data, information on the latest
events, and values of status and counter parameters. The code can be read with a
mobile device containing the ABB service application, which then sends the data to ABB
for analysis. For more information on the application, contact your local ABB service
representative.
The QR Code can be generated by choosing Menu - Assistants - QR code on the
control panel.
540 Fault tracing