ABB ACS880 - Page 616

STATE/DescriptionValueNameBit
Accelerate to inching (jogging) setpoint 1.1Inching 18
Note:
• Bits 4...6 must be 0.
•
See also section Jogging (page 61).
Inching (jogging) 1 disabled.0
Accelerate to inching (jogging) setpoint 2.1Inching 29
See notes at bit 8.
Inching (jogging) 2 disabled.0
Fieldbus control enabled.1Remote cmd10
Control word and reference not getting through to the drive,
except for bits 0...2.
0
Select External Control Location EXT2. Effective if control
location is parameterized to be selected from fieldbus.
1Ext ctrl loc11
Select External Control Location EXT1. Effective if control
location is parameterized to be selected from fieldbus.
0
Reserved.12 to 15
616 Fieldbus control through a fieldbus adapter