ABB CL Series User Manual

Overview
13
1SVC 440 795 M1100
– Off-delayed with random switching,
– On- and off-delayed,
– On- and off-delayed with random switching,
– Single pulse,
– Synchronous flashing,
– Asynchronous flashing.
• Use up and down counters,
• Count high-speed signals:
– Up/down counters with upper and lower limit value,
– Preset,
– Frequency counters,
– High-speed counters,
– Count incremental encoder values.
•Compare values,
• Display graphics, texts, variables, enter setpoints, display
flashing values and graphics, change and replace graphics
and texts by pushbutton,
• Process analog inputs and outputs,
• Use 7-day and year time switches,
• Count operating hours (operating hours counter),
• Communicate via the integrated CL-NET network,
• Set up point-to-point communication via the serial
interface,
• Implement closed-loop control with P, PI and PID
controllers,
• Scale arithmetic values,
• Output manipulated variables as pulse-width modulated
signals,
• Run arithmetic functions:
–Add,
–Subtract,
–Multiply,
– Divide.
• Track the flow of current in the circuit diagram
• Load, save and password-protect circuit diagrams

ABB CL Series Specifications

General

Manufacturer	ABB
Rated Control Supply Voltage (Us)	24 V DC
Mounting	DIN Rail
Category	Relays
Contact Configuration	SPDT
Coil Voltage	24 V DC
Operating Temperature	-40°C to +70°C
Electrical Life	100 Thousand Cycles
Output	Relay