Visualization with the
display system
268
1SVC 440 795 M1100
Memory layout
Figure: 146: Memory layout of the display system
The program memory has a maximum size of 8 KByte. The
circuit diagram is stored in this memory range and the
memory is reserved for the largest screen to be displayed.
A total of 24 KByte is available in the screen memory. This
memory range is used to store all the screens that are
created.
Consequently, it should be ensured that screens are created
with the smallest possible memory requirement since the
largest screen and the created circuit diagram have to be
stored in the program memory. If no circuit diagram is
required, the memory requirement for the largest screen
must not exceed 8 KByte.
Program memory
Circuit
diagram
Screen 4
Screen 4
Screen 1
Screen 2
Screen 3
Screen 5
Screen memory
8 kB
24 kB
h
The status bar of CL-SOFT shows the available working
memory, the available screen memory and the required
memory for the active screen element.
If the memory available is exceeded, the colour of
indicated value changes to to red.
To Next Page
Loading...
Need help?
General
