Setting date and time
353
1SVC 440 795 M1100
Setting date and time The display base modules are provided with a real-time clock
with date and time. The “time switch” function blocks can
be used to implement time switch applications.
If the clock has not yet been set or if the display system is
switched on after the buffer time has elapsed, the clock
starts with the setting “WE 1:00 01.05.2002”. The display
system clock operates with date and time so the hour,
minute, day, month and year must all be set.
X Select SET CLOCK… from the main menu.
This will open the menu for setting the time.
X Select SET CLOCK.
X Set the values for time, day, month and year.
X Press the OK button to access the Entry mode.
–
úí Move between the parameters
–
ÍÚ Change the value of a parameter
– OK Save day and time
– ESC Retain previous setting.
Press ESC to leave the time setting display.
h
The time : 1:00 indicates the operating system version in
the device.
SET CLOCK
DST SETTING
HH:MM: 00:27
DD.MM: 05.05
YEAR : 2002
To Next Page
Loading...
Need help?
General
