ABB CL Series User Manual

Commissioning
94
1SVC 440 795 M1100
Entering network stations
Only the network station at physical location 1 with station
number 1 has a station list.
X Use the Í and Ú cursor buttons to select the STATION
menu and press the OK button.
X Proceed to the station with physical address 2.
X Select the required physical location with the Í and Ú
cursor buttons. Press the OK button.
X Use cursor buttons Í and Ú to select station number 2.
X Press the OK button.
At physical location 2, the station has been assigned station
address 2.
X Press ESC to return to the STATIONS menu item.
h
The left-hand column is the physical location. You can only
assign physical locations to unused station numbers.
The physical location 1 is permanently assigned to
station number 1.
1 1 Æ
2 0
3 0
4 0 æ
1 1 Æ
2 2
3 0
4 0 æ

ABB CL Series Specifications

General

Manufacturer	ABB
Rated Control Supply Voltage (Us)	24 V DC
Mounting	DIN Rail
Category	Relays
Contact Configuration	SPDT
Coil Voltage	24 V DC
Operating Temperature	-40°C to +70°C
Electrical Life	100 Thousand Cycles
Output	Relay