Changing between winter/
summer time (DST)
355
1SVC 440 795 M1100
Selecting DST
The display system shows you the options for the DST
change.
The standard setting is NONE for automatic DST changeover
(Tick at NONE).
X Select the required variant and press the OK button.
Manual selection
If you wish to enter your own date,
X Proceed to the MANUAL menu and press 2 x OK.
–
úí Move between the parameters
–
ÍÚ Change the value of a parameter
– OK Save day and time.
– ESC Retain previous setting.
X Press ESC to leave the display.
X Select the day and time at which summer time is to
commence.
X Select the day and time at which summer time is to end.
NONE å Æ
MANUAL
EU
GB æ
US
SUMMERTIME START
DD.MM: 00.00
SUMMERTIME END
DD.MM: 00:00
h
The following applies to the display system:
The time change algorithm always calculates the
date from the year 2000. Enter the time change for the
year 2000.
h
The same time for conversion applies as for the legally
determined variants (EU, GB, US).
To Next Page
Loading...
Need help?
General
