ABB CL Series User Manual

Display system
14
1SVC 440 795 M1100
If you prefer to wire up the display system from a PC, then
use the CL-SOFT programming tool. This software is used to
create and test your circuit diagram on the PC. All display
and operator functions on the display system device are
created exclusively using CL-SOFT. CL-SOFT enables you to
print out your circuit diagram in DIN, ANSI or CL format.
Device overview Display system devices at a glance
Display module
Figure: 1: Display module device overview
a DEL button
b Graphic display
c ALT button
d LEDs for signalling
e Mode button
f Right, down cursor buttons
g OK button
h Left, up cursor buttons
i ESC button
a
d
b
i
efg
h
c

ABB CL Series Specifications

General

Manufacturer	ABB
Rated Control Supply Voltage (Us)	24 V DC
Mounting	DIN Rail
Category	Relays
Contact Configuration	SPDT
Coil Voltage	24 V DC
Operating Temperature	-40°C to +70°C
Electrical Life	100 Thousand Cycles
Output	Relay