Technical data
405
1SVC 440 795 M1100
Residual current per channel on signal 0 mA
< 0,1
Max. output voltage
On signal 0 with external load, 10 MO V 2,5
On signal 1, I
e
= 0.5 A U = U
e
– 1 V
Short-circuit protection
Thermal (Q1 to Q4)
(analysis via diagnostics input I16)
Yes
Short-circuit tripping current for R
a
F 10 mO
(depending on number of active channels and their
load)
A 0.7 F I
e
F 2
Maximum total short-circuit current A
8
Peak short-circuit current A 16
Thermal cutout Yes
Maximum switching frequency with constant resistive
load R
L
= 100 kO (depends on program and load)
Switching
operations/
h
40000
Parallel connection of outputs with resistive load; inductive load with
external suppression circuit (a section “Connecting transistor outputs”,
page 64); combination within a group.
Yes
Group 1: Q1 to Q4
Maximum number of outputs 4
Total maximum current
Attention!
Outputs connected in parallel must be switched at the
same time and for the same duration.
A 2
Signal indication of outputs
LCD Status display,
if provided
CL-LDT…
To Next Page
Loading...
Need help?
General
