Commissioning
90
1SVC 440 795 M1100
X Press pushbutton actuator S2, that has been connected as
a N/C contact.
The power flow is interrupted and relay Q1 drops out.
Use the cursor buttons
Ú ú í to move between the contacts
or coil.
X Press the cursor button í.
The cursor moves to the second contact.
X Press the ALT button. The display changes to display
status with contact and/or coil designation.
Figure: 71: Power flow display: Input I1 is closed, input I2 is
open, relay Q1 has dropped out
= Visible area
â==#-------- #
L: 001 I 01
‚==#-------- #
L: 002 I 02
I 01====I 02-------------------Ä Q 01
L: 1 C:2 RUN
To Next Page
Loading...
