1ST PHONE
NUMBER
The first number to be dialled to contact the ARC.
2ND PHONE
NUMBER
The second number to be dialled to contact the ARC; the system only
attempts to contact the ARC on this number if the first contact number did
not successfully connect.
PRIORITY The modem (primary or back-up) to be used to communicate with the ARC.
4. After programming is complete, the option to make a test call to the station is displayed on the
keypad.
14.13.4.2 Edit
To edit the central station settings:
1. Scroll to CENTRAL STATION > EDIT.
2. Press SELECT.
3. Select the desired programming option shown in the table below.
ACCOUNT ID This information should be available from the receiving station and is
used to identify users each time a call is made to the ARC.
ACCOUNT
NAME
Description of the Remote Alarm Receiving Centre.
PROTOCOL The communication protocol to be used (SIA, Contact ID, Fast Format).
1ST PHONE
NUMBER
The first number to be dialled to contact the ARC.
2ND PHONE
NUMBER
The second number to be dialled to contact the ARC; the system only
attempts to contact the ARC on this number if the first contact number
did not successfully connect.
DIAL
ATTEMPTS
Enter the number of times that the system will attempt to make a call to
the receiver.
DIAL
INTERVAL
Enter the number of seconds to delay between failed dial attempts. (0–
999)
ASSIGN AREA Assign the areas for which events are reported to the ARC.
REPORTED
EVENTS
Define the types of events reported to the ARC.
PRIORITY The modem (primary or back-up) to be used to communicate with the
ARC.
AUTOMATIC
TEST
Defines a schedule for testing the connection to the ARC. Possible
values range from every hour to once every 30 days.
4. After programming is complete, the option to make a test call to the station is displayed on the
keypad.
14.13.4.3 Delete
Enables you to delete a configured ARC.
14.13.4.4 Make Test Call
Enables you to test the connection with the ARC.
To make a test call, do the following:
SPC42/52/53/63 – Installation & Configuration Manual Engineer programming via the keypad
© Vanderbilt 2023 112 I-200572
08.12.2023
To Next Page