Acre SPC42 - User Profiles; Add; Edit; Delete

To Next Page

To Previous Page

14.8 User Profiles

See also

Adding/Editing User Profiles on page141

14.8.1 Add

To add user profiles to the system:

The creator must be a user profile type MANAGER.

1. Scroll to USERS PROFILES >ADD.

The option NEW NAME is displayed. Press OK.

2. Enter a customized user profile name and press ENTER.

The keypad confirms that the new user profile has been created.

14.8.2 Edit

To edit user profiles on the system:

1. Scroll to USER PROFILES>EDIT.

2. Press OK.

3. Edit the desired user profile setting shown in the table below.

CHANGE NAME Edit the name of the profile if required.

CHANGE AREAS Select the areas relevant to this profile.

CALENDAR Select a configured calendar or NONE.

RIGHT Enable or disable system features for this

profile. See User rights on page141.

DOOR Select the type of access available to this

profile for the configured doors. Options are

NONE, NO LIMIT or CALENDAR.

SITE CODE Enter a site code for all cards using this profile.

14.8.3 Delete

To delete user profiles on the system:

1. Scroll to USER PROFILES>DELETE.

2. Scroll through the user profiles to the required profile.

3. Press OK.

You are prompted to confirm deletion.

4. Press OK to delete the user profile.

14.9 Wireless

Wireless sensor support on the SPC panel is provided by two way wireless modules SPCW120,

WRXT (868MHz).

SPC42/52/53/63 – Installation & Configuration Manual Engineer programming via the keypad

08.12.2023