15.6.6 FlexC Status
This page displays the status of each ATS configured on your system.
1. To view the status of an ATS, go to Status > FlexC.
2. The table below describes the status criteria available for each ATS.
ATS
Registration
ID
The unique registration ID of the ATS allows the panel to be uniquely
identified at the RCT.
ATS Status The status of the ATS, for example, initializing.
Time since
last poll
The time since the last poll on any ATP in the ATS.
Event Queue
Count
Number of events in the event queue waiting to be transmitted.
Event Queue List of the events currently in the Event Queue. The tables shows the
following:
l
Event Seq No.
l
Event Timestamp
l
Event Description
l
Additional Event Info
l
Start Timestamp
l
Report Duration
Event Log Event log history for all the events that have occurred on the ATS. The
table shows the same fields as Event Queue above and the following
additional field:
l
Event Seq No.
l
Event Timestamp
l
Event Description
l
Additional Event Info
l
Result
l
Reported ATP
l
Start Timestamp
l
ACK/Fail Timestamp
l
Report Duration
Network Log Network log for the ATS showing the configured polling interval.
SPC42/52/53/63 – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2023 136 I-200572
08.12.2023
To Next Page