Acre SPC42 - Configuring SMS

Right
User Profile
Type
Default
Description
Set User
Profiles
User can create and edit user profiles on the system.
Set
Calendars
User can configure calendars.
Set Doors User can edit doors.
* Functions not enabled by default for this user but can be selected.
Access Control
1. Enter a Site Code, if required, for all cards assigned to this user profile. See Supported card
readers and card formats on page286.
2. Select the Door Access List rights of this user profile for the doors configured on the system.
Options are:
- No access
- No time limit (that is, 24 hour access)
- Calendar (if configured)
3. Users using this User Profile
A list of users assigned to this profile is displayed. Click a user to view or edit the user’s details.
You can create a new user profile based on an existing profile by clicking Replicate. A new User
Profile page is displayed.
See also
Adding/Editing User Profiles on page141
Adding/Editing an area on page186
15.8.3 Configuring SMS
The SPC system allows remote (SMS) messaging on systems with installed modems.
Prerequisites
o
A modem is installed and identified by the system.
o
The function SMS Authentication is activated. (See Options on page169.)
1. Select Users>Users SMS.
The Engineer SMS ID and a list of User SMS IDs with corresponding SMS details displays.
2. Click the Test button to test an SMS number.
3. Click Add to add a new SMS ID or click the Edit icon beside the required SMS ID to edit the
SMS settings.
4. Configure the SMS details as follows:
SMS ID System generated ID.
User Select a new user for this SMS ID if required.
SPC42/52/53/63 – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2023 144 I-200572
08.12.2023