Acre SPC42 - Compliance with Vds 2115:2015-12; Compliance with EN50131 Approvals

EN50131 Requirement (and relevant section) Relevant Vanderbilt documentation
Details of any programmable facility that would render an
I&HAS non-compliant with EN 50131-1:2006, 8.3.13 or
compliant at a lower security grade, with instruction on
consequent removal of compliance labeling (see 4.2 and
8.3.10).
Unrestricted Grade on page184
Options on page169
Compliance with EN50131 Approvals below
SPC products listed have been tested according to EN50131-6, and all relevant RTC specifications.
Product Type Standard
l
SPC53
l
SPC63
l
SPC6350.320
l
SPC5350.320
l
SPCP355.300
l
SPCP333.300
l
SPCP355.300
l
SPCE652.100
l
SPCK420.100
l
SPCK421.100
l
SPCE452.100
l
SPCE110.100
l
SPCE120.100
l
SPCA210.100
l
SPCK620.100
l
SPCK623.100
l
SPCN110.000
l
SPCN310.000
EN50131-6
l
SPC52
l
SPC42
l
SPCP332.300
EN50131-6
3.3 Compliance with VdS 2115:2015-12
Only VdS-approved maintenance-free batteries may be used for as a system standby backup.
3.3.1 Compliance with EN50131 Approvals
Software Requirements
l
In the Standards settings page, select Europe under Region to implement EN50131
requirements.
l
Select Grade 2 or Grade 3 to implement the grade of EN50131 compliance.
l
The Wireless setting Prevent Setting Time must be set to a value greater than 0 and less than
20.
l
The Wireless setting Device Lost Time must be set to a value less than 120.
SPC42/52/53/63 – Installation & Configuration Manual Directives and standards
© Vanderbilt 2023 18 I-200572
08.12.2023