Acre SPC42 - Page 198

To Next Page

To Previous Page

Delete Delete the selected calendar.

The calendar cannot be deleted if it is currently assigned to an SPC configuration item, that is,

zone, area, user profile, output, trigger, door or X-Bus component. A message is displayed

indicating the assigned item.

Global calendars created using SPC Manager cannot be deleted.

15.10.5.1 Adding/Editing a calendar

1. Select Configuration > Calendars > Add.

2. Provide a Description for the calendar (max. 16 characters).

Copying a Calendar

To make a copy of this calendar structure, click the Replicate button.

A new calendar is created with the same configuration as the original calendar. You can provide a

new description for the new calendar and edit the calendar configuration as required.

Week Types

Calendars are configured by assigning an optional Week Type for each calendar week. Up to three

Week Types may be defined for each calendar. Not all weeks must have a Week Type (that is, a

Week Type may be ‘None’). There is a system maximum number of 64 calendar configurations.

To configure a week type

1. Click Week Types.

2. Enter the desired times for setting/unsetting or for triggers. Use time guidelines for Automatic

Setting/Unsetting of Areas (see Automatic setting/unsetting of areas on the next page), or for

Automatic Setting/Unsetting of other Panel Operations (see Automatic setting/unsetting of

other panel operations on the next page).

Up to three week types may be configured.

3. Click Save and then Back.

4. Select the desired week type from the drop down menu for each of the required scheduled

weeks in the calendar.

5. Click Save.

6. Click Back.