Acre SPC42 - Page 274

CODE CID EVENT DESCRIPTION
330 SYSTEM PERIPHERAL
TROUBLE
PSU fault and restore.
333 EXP FAIL X-Bus cable and node communications fault and restore.
338 EXP BATT X-Bus node battery fault and restore.
341 EXP TAMPER X-Bus tamper and RF antenna tamper alarm and restore.
342 EXP AC X-Bus node mains fault and restore.
344 RF JAM RF jam fault and restore.
351 TELCO 1 Primary modem fault and restore.
352 TELCO 2 Secondary modem fault and restore.
376 HOLDUP TROUBLE
380 SENSOR TROUBLE
401 OPENCLOSE Unset, post alarm and fullset.
406 ALARM ABORT Cancel alarm.
451 EARLY OPENCLOSE
452 LATE OPENCLOSE
453 FAIL TO OPEN Late to unset.
454 FAIL TO CLOSE Late to set.
456 EVENT PARTSET Partset A and B.
461 CODETAMPER User code tamper.
466 SERVICE Engineer mode enabled and disabled.
570 BYPASS Zone inhibited and uninhibited, zone isolated and un-isolated.
601 MANUAL TEST Modem manual test.
602 AUTO TEST Modem automatic test.
607 WALK TEST
613 ZONE WALKED
614 FIRE ZONE WALKED
615 PANIC ZONE WALKED
625 TIME RESET Time set.
SPC42/52/53/63 – Installation & Configuration Manual Appendix
© Vanderbilt 2023 274 I-200572
08.12.2023