6253 DC Voltage Current Source/Monitor Operation Manual
2.3 Soft Keys
2-8
2. Source Setting the source-related parameters
• Source Selecting the source function, VS or IS
• SrcRng Down Raising the source range
• SrcRng Up Lowering the source range
• RngAuto Source range DC or pulse source: FIT or LOCK
Sweep source: AUTO or FIX
• Sus Z Impedance in the Suspend status: HiZ or LoZ
• Resp Output response: Slow or Fast
• 2W/4W Remote sensing setting 2W (2-wire connection) or 4W (4 wire connection)
• NEXT Page switching
• RETURN Returning to the top
3. Measure Sets the measurement-related parameters.
• Measure Measurement function: VM, IM or RM
• MRange Measurement range: AUTO or FIX
• AZero Auto Zero function: ON or OFF
• IT Setting and displaying the integration time
• Down Decreases the integration time.
• IT Displays the setting integration time.
• Up Increases the integration time.
• RETURN Returns to the Measure layer.
• NULL NULL calculation: ON or OFF
• Meas SW Measurement: ON or OFF
• Store SW Measurement data memory: Normal or OFF
• Memory View List of stored measured values
• NEXT Page switching
To Next Page
