ADCMT 6253 - Page 59

6253 DC Voltage Current Source/Monitor Operation Manual
2.6.2 Menu Structure and Parameter List
2-25
1) Start Value Linear sweep start value When selecting Linear
VS IS
-110.000 V to +110.000 V +0.00000 A to 2.00000 A
2) Stop Value Linear sweep stop value When selecting Linear
VS IS
-110.000 V to +110.000 V +0.00000 A to 2.00000 A
3) Step Value Linear sweep step value When selecting Linear
VS IS
000.001 mV to 110.000 V 0.00001 A to 2.00000 A
1) Level Value Fixed sweep level value When selecting Fixed
VS IS
-110.000 V to +110.000 V +0.00000 A to 2.00000 A
2) Sample Count Fixed sweep sample count When selecting Fixed
1 to 20000
1) Start Adr
2) Stop Adr
When selecting Random
Start address Stop address
0 to 19999 0 to 19999
1) Start Value Log sweep start value (common with the Liner sweep) When selecting
Log
VS IS
-110.000 V to +110.000 V +0.00000 A to 2.00000 A
2) Stop Value Log sweep stop value (common with the Liner sweep) When selecting
Log
VS IS
-110.000 V to +110.000 V +0.00000 A to 2.00000 A
3) Step Decade Number of partitions by ten for the Log sweep When selecting Log
1/2/5/10/25/50
MENU
3) Sweep Value
Category Edit (Input/Run level)Select