Top Adr Random memory setting top address
Select and change with the soft key SetAdr.
SetAdr Random memory setting top address
Switch to the Top Adr setting. *Use the soft key to run.
PageUp Page scroll up
PageDown Page scroll down
SAVE Random memory save (to the non-volatile memory)
*Use the soft key to run.
LOAD Random memory load (from the non-volatile memory)
*Use the soft key to run.
CLEAR Random memory clear
*Use the soft key to run.
MENU
4) Sweep Memory
Category Edit (Input/Run level)Select
1) Hold Time (Th) Hold time
0 ms to 6 s
2) Source Delay
(Tds)
Source delay time
5 s to 59997 ms
3) Meas Delay (Td) Measurement delay time
20 s to 59997 ms
4) PLS Width (Tw) Pulse width
25 s to 59997 ms
5) Period (Tp) Period
50 s to 60000 ms
6) Auto Rng Delay
(Tar)
Auto range delay time
0 ms to 5000 ms
5) Time
Category Edit (Input/Run level)Select
To Next Page
Loading...
