COMMUNICATION AND VISUALIZATION TECHNOLOGIES
via Pastrengo, 7/C – 24068 Seriate (Bergamo)
Figure 68: Manual clock setup
The system clock can be adjusted by tapping and next to date/time parts (system clock is presented in
“day/month/year hours:minutes:seconds” format). Alternatively it is possible to select the part to be modified
by pressing “Next” and then use soft keys labeled “-” or “+” for respectively decrementing or incrementing the
selected part (highlighted in yellow).
The new clock configuration is confirmed pressing “Ok”.
9.4 Displays setup
9.4.1 Local override
The configuration of LED signs properties is usually defined by the data file being used by the system. In
order to perform local modifications to the configuration defined by the data file, the local override switch
must be enabled by accessing “Setup
Displays setup
Local override” (Figure 69).
Figure 69: Displays setup local override
Changes are immediately applied (so there is no need to press any “Ok” button): simply press “Back” for
confirming settings and exiting the menu.
To Next Page
Loading...
Need help?
General