COMMUNICATION AND VISUALIZATION TECHNOLOGIES
via Pastrengo, 7/C – 24068 Seriate (Bergamo)
Figure 24: Current info message selection
The current info message is automatically broadcasted to all internal LED signs managed by TC-430™.
If no info message is currently selected then internal LED signs are turned blank.
7.2.6 P/R message
P/R messages (public relation messages) are intended for publication on external LED signs. External signs
alternately show current destination (if any) and current P/R message (if any).
The list of available P/R messages is accessed by selecting “P/R” from the TC-430™ main screen or by
selecting “Menu
Service menu
Select P/R message”. The screen in Figure 25 is shown.
Figure 25: P/R message selection
P/R message selection, filtering, confirmation and clearage follows the same directions described in
paragraph 7.2 regarding destination selection.
Once an info message is confirmed, then it is reported on the TC-430™ main screen (Figure 26).
To Next Page
Loading...