COMMUNICATION AND VISUALIZATION TECHNOLOGIES
via Pastrengo, 7/C – 24068 Seriate (Bergamo)
Changes are immediately applied (so there is no need to press any “Ok” button): simply press “Back” for
confirming settings and exiting menu.
9.5.5 Announcements repetitions
TC-430™ vocal announcements can be repeated several times (for letting the destination of the bus to be
announced several times if the bus remains at the stop keeping doors open).
The number of vocal announcement repetitions can be configured accessing “Setup
Audio setup
Announcements repetitions” (Figure 86).
Figure 86: Vocal announcements repetitions
The number of repetitions can be adjusted by dragging the slider in Figure 86 on the touch screen, or by
pressing “-” and “+” for respectively decreasing or increasing the repetitions count.
The time interval to be obeyed by the system between subsequent announcements can be configured by
accessing “Setup
Audio setup
Repetitions interval” (Figure 87).
Figure 87: Vocal announcements repetitions interval
The interval to be obeyed between announcements can be adjusted by dragging the slider in Figure 86 on
the touch screen, or by pressing “-” and “+” for respectively decreasing or increasing the interval.
The interval can be adjusted in 5 second steps.
To Next Page
Loading...
Need help?
General