COMMUNICATION AND VISUALIZATION TECHNOLOGIES
via Pastrengo, 7/C – 24068 Seriate (Bergamo)
7.2 Route/destination mode
While in Route/destination mode, the TC-430™ allows the direct control of all the on-board signs, whose
content has to be manually selected by the bus driver.
Figure 15 shows the main screen of TC-430™ while in Route/destination mode: soft keys report the most
important functions offered by the active mode (all remaining functions can be accessed via “Menu” button).
Figure 15: “Route/destination” mode main screen
7.2.1 Destination selection
The list of available destinations is accessed by pressing any alphanumeric key or the up/down arrow keys
on the keypad from TC-430™ main screen (Figure 16).
Figure 16: Destination selection
Destinations list can be accessed also selecting “Menu
Service menu
Select destination” from the main
screen.
Every destination has a code and a description. The description can be slid horizontally (by dragging it on
the screen) to read it entirely if it does not fit on the screen.
To Next Page
Loading...