COMMUNICATION AND VISUALIZATION TECHNOLOGIES
via Pastrengo, 7/C – 24068 Seriate (Bergamo)
[ENG]TC-430_Manual_1_116_0_A.doc
Copyright © 2016-2018 Aesys S.p.A.
All rights reserved
Figure 121: Software upgrade progress
The screen in Figure 122 is shown while processing the upgrade file. During software upgrade elaboration
no interaction with TC-430™ is possible.
Figure 122: Please wait while applying software upgrade
When software upgrade process completes, the upgraded software version is started (the version of the
software being used can be reviewed as described in paragraph 8.1).
10.1.2 Firmware upgrades
Be aware!
Firmware upgrade is a critical operation: problems or errors occurring during the upgrade process might
make TC-430™ unusable.
Please pay attention and only apply firmware upgrades directly suggested by Aesys®.
TC-430™ firmware can be upgraded selecting “Setup
Maintenance
Load new firmware”. The screen in
Figure 123 is shown for allowing the selection of the firmware upgrade file.
To Next Page
Loading...