COMMUNICATION AND VISUALIZATION TECHNOLOGIES
via Pastrengo, 7/C – 24068 Seriate (Bergamo)
Be aware!
Software upgrade is a critical operation: problems or errors occurring during the upgrade process might
make TC-430™ unusable.
Please pay attention and only apply software upgrades directly suggested by Aesys®.
TC-430™ software can be upgraded selecting “Setup
Maintenance
Load new software”. The screen in
Figure 120 is shown for allowing the selection of the software upgrade file to be applied.
Figure 120: Software upgrade file selection
Software upgrades are usually shipped as “.tar.gz” files, but this might change (please refer to Aesys®
technical support for having the latest software upgrades for TC-430™).
The software upgrade is commenced by selecting the proper file and pressing “Ok”; the screen reported in
Figure 121 is shown for notifying that the software is about to be restarted during the upgrade process.
To Next Page
Loading...
Need help?
General