Collimator Parameters
On systems with an automatic collimator, the collimation is automatically set,
based on the selected exposure.
To use the same collimation setting on subsequent exposures, push the restore
button to restore the collimation setting of the previous exposure.
The collimator parameters are available on the positioning screen of the
software console and on the main screen of the tube head display.
Table 22: Collimator settings
Icon
Description
Readout of the actual collimation setting.
Restore the collimation setting of the previous exposure.
Related Links
Positioning controls on page 158
Main screen of the Tube head display on page 133
DR 600 | Software Console and Tube Head Display | 161
3261K EN 20210708 0808
To Next Page
Loading...
