Maintenance
Complete maintenance schedules are available in the Agfa service
documentation for consultation by an Agfa trained and authorized service
engineer.
Maintenance of the DR Detector
The DR Detector requires regular calibration. Calibration instructions are
described in the DR Detector Calibration Key User Manual (doc 0134).
Topics:
• Maintenance of the radiographic table, radiographic wall stand and X-
Ray Tube Head Unit
Maintenance of the radiographic table, radiographic wall stand
and X-Ray Tube Head Unit
The X-ray unit and all components require regular maintenance to ensure the
equipment is safe and reliable for operation.
WARNING:
Operation in unsafe condition includes the risk of radiological
exposure and injury of the patient and/or the operator. The
customer is responsible to ensure the fault-free condition of the
equipment.
WARNING:
Wear of equipment due to excessively long intervals between
service may lead to personal injury and property damage due to
worn and unsafe parts.
WARNING:
Incorrect or defective spare parts may adversely affect the safety
of the system and lead to damages, malfunctions or total failure.
Use only original spare parts provided by the manufacturer.
WARNING:
Improper changes, additions, maintenance or repair of the
equipment or the software can lead to personal injury, electrical
shock and damage to the equipment. Safety is only guaranteed
when changes, additions, maintenance or repairs are carried out
by an Agfa certified field service engineer. A non certified
engineer performing a modification or service intervention on a
medical device, acts on his own responsibility and makes the
warranty void.
80 | DR 600 | Introduction
3261K EN 20210708 0808
To Next Page
Loading...
