AGFA DR 600 - Reconstruction Parameters

Reconstruction parameters
Table 35: Reconstruction parameters
Start Height (cm)
The height of the first slice of the reconstruc-
tion sequence, relative to the tabletop or the
wall stand front panel.
End Height (cm)
The height of the last slice of the reconstruc-
tion sequence, relative to the tabletop or the
wall stand front panel.
Slice Thickness (mm)
The thickness of the slices.
Sharpness
Increasing the sharpness will improve the
quality of the image but the image processing
will take longer
176 | DR 600 | Software Console and Tube Head Display
3261K EN 20210708 0808