Positioning the Radiographic Table
The radiographic table is adjustable in height from 55 cm to 90 cm.
An optional stop position at 70 cm can be configured during installation.
The movements of the radiographic table are controlled by foot pedals
mounted at front side of the table. Additional foot pedals at the rear side are
available as an option.
DANGER:
Make sure that no persons or objects are within the movement
area of the system where they can collide with moving parts of
the system.
WARNING:
Maintain visual contact with the patient while moving the
equipment close to the patient in order to detect hazardous
situations (e.g. collisions) early and to avoid them.
Related Links
Collision protection on page 200
Collision indicator on page 185
Emergency stop button on page 40
Topics:
• Positioning the floating tabletop
• Adjusting height
DR 600 | Radiographic Table | 197
3261K EN 20210708 0808
To Next Page
Loading...
