AGFA DR 600 - Page 187

1
2
6
9
7
11
10
12
5
8
4
13
14
3
1.
X-ray tube angle (alpha), right
2.
X-ray tube angle (alpha), left
3.
Vertical axis movement, up
4.
Vertical axis movement, down
5.
Longitudinal axis movement, right
6.
Longitudinal axis movement, left
7.
Transversal axis movement, front
8.
Transversal axis movement, back
9.
Automatic positioning button
10.
Switch on the collimator light
11.
Increase the longitudinal collimation field
12.
Decrease the longitudinal collimation field
13.
Increase the transversal collimation field
14.
Decrease the transversal collimation field
Figure 81: Remote Control for positioning and collimator control
WARNING:
Monitor the system movements initiated by the remote control
always.
WARNING:
Do not use the remote control in case of an obvious defect.
DR 600 | Ceiling Suspension | 187
3261K EN 20210708 0808